An EICR is not a quick look at your fuse board or a test of a few sockets. It is a detailed inspection of the fixed electrical installation that helps establish whether the wiring in a home, rental property, shop, office, warehouse or industrial unit is safe to continue using. So, what does an EICR check? It checks the condition of the electrical system against the safety requirements of BS 7671, the UK Wiring Regulations, and identifies defects that could lead to electric shock, fire or disruption to your premises.
For landlords, an EICR is a legal requirement in most privately rented homes. For business owners, facilities managers and industrial operators, it is a practical part of meeting electrical safety duties and keeping operations running. For homeowners, it provides valuable reassurance before buying a property, after major alterations, or where an installation is older and its history is unclear.
What does an EICR check during an inspection?
An Electrical Installation Condition Report examines the fixed wiring and equipment that distribute electricity around a building. This includes the consumer unit or distribution board, circuits, sockets, switches, lighting points, isolators, fixed appliances and earthing arrangements.
The electrician begins with a visual inspection. They look for signs of damage, poor workmanship, overheating, unsuitable alterations and equipment that no longer meets the required standard. A cracked socket face, exposed cable, missing blanking plate or damaged consumer unit enclosure can all indicate a potential safety issue.
Testing then provides information that cannot be gathered by sight alone. Depending on the property and the circuits present, this includes continuity testing, insulation resistance testing, polarity checks, earth fault loop impedance testing and verification of RCD protection. These tests confirm whether safety devices should disconnect the supply quickly enough if a fault occurs and whether the installation has an effective path to earth.
An EICR also considers whether the installation remains appropriate for how the property is now used. For example, a domestic property with an EV charger, electric shower, heat pump or solar installation may have electrical demands that did not exist when the original wiring was installed. In commercial settings, new machinery, added workstations, warehouse racking or a change in occupancy can alter the demands placed on a system.
The main areas an EICR covers
The exact scope depends on the size and type of building, but a thorough inspection typically covers the condition of the consumer unit or distribution boards, protective devices such as fuses, MCBs and RCDs, circuit wiring, earthing and bonding, socket outlets, switches, lighting circuits and fixed electrical equipment.
The electrician will check that circuits are correctly identified and protected. Clear labelling matters more than many people realise. In an emergency or during maintenance, staff or occupants need to know which circuit controls which area or item of equipment. Incorrect labels can make isolation unsafe and cause unnecessary downtime.
Earthing and bonding are especially important. They reduce the risk of dangerous touch voltages should a fault develop. Metal services such as water and gas pipes may require bonding, while the electrical installation needs a reliable earthing arrangement suited to the supply. These parts of the system are not always visible day to day, but they are fundamental to electrical safety.
For commercial and industrial premises, the inspection may also take account of three-phase distribution, machinery supplies, emergency lighting circuits, outdoor equipment, workshops and areas exposed to heat, moisture, dust or mechanical damage. A report should reflect the actual environment, rather than applying a one-size-fits-all approach.
What an EICR does not check
An EICR is focused on the fixed installation. It does not automatically cover every portable appliance plugged into it. Kettles, computers, extension leads, power tools and other moveable equipment may need separate portable appliance testing where appropriate.
Nor is an EICR a guarantee that no fault will ever occur. Electrical components can deteriorate after the inspection, and damage can happen through drilling into cables, water ingress, overloading or unauthorised alterations. The report records the condition of the installation at the time it was inspected.
Some testing can also require circuits to be isolated temporarily. A competent electrician will plan this carefully, particularly in occupied homes, trading premises and operational sites. In some larger buildings, testing may be phased to minimise disruption, but safety checks should never be rushed simply to avoid a short interruption.
Understanding EICR observations and codes
If the electrician finds issues, these are recorded in the report using observation codes. These codes help you understand what needs attention and how urgently.
A C1 observation means danger is present and immediate action is required. This could include exposed live parts or a fault that creates an immediate risk of electric shock. A C2 observation means the condition is potentially dangerous and urgent remedial work is needed. FI means further investigation is required because the electrician cannot confirm the safety of part of the installation without additional work or access.
Any report containing C1, C2 or FI observations will be marked as unsatisfactory. That does not necessarily mean the entire building must be rewired. It means the identified issues need to be addressed before the installation can be considered satisfactory.
A C3 observation is a recommendation for improvement. It is not normally a reason for an unsatisfactory result, but it should still be considered. For instance, an older but functioning consumer unit may not have the same level of RCD protection expected in a modern installation. The right solution depends on the condition of the system, the property’s use and the level of risk involved.
How often should an EICR be carried out?
There is no single interval that suits every property. The appropriate frequency depends on the type of installation, its age, the environment and how it is used.
Private landlords in England must generally have an EICR carried out at least every five years, or sooner if the report recommends it. Landlords also need to provide the report to tenants and comply with the relevant requirements for remedial work where defects are identified.
For owner-occupied homes, a five to ten-year interval is commonly recommended, with earlier checks advisable after flooding, fire damage, major electrical work or a change of use. If you are buying an older property, an EICR can reveal concerns that a standard visual viewing will not show.
Commercial properties are often inspected at intervals of around five years, but this can be shorter for workshops, industrial environments, public buildings or places where equipment and circuits face heavier use. A warehouse with machinery and three-phase supplies has different risks from a small office, while a holiday let may need a different inspection schedule from a family home. The previous report and the electrician’s recommendation are useful starting points.
Why an EICR matters before upgrades or alterations
An EICR is particularly useful before adding high-demand electrical equipment. EV chargers, solar battery systems, heat pumps, electric showers and commercial machinery all rely on a safe, suitably rated supply. Installing new equipment onto an overloaded, poorly protected or ageing system can create problems that are more expensive to resolve later.
The inspection may show that the existing installation is ready for the upgrade, or it may identify work such as a consumer unit replacement, new circuit, improved earthing or local distribution changes. Knowing this before work starts gives homeowners and businesses a clearer plan, more accurate costs and fewer surprises on site.
For commercial clients, it also supports planned maintenance. Resolving a developing defect during an organised visit is usually far less disruptive than dealing with a failed circuit, damaged distribution board or unexpected shutdown during working hours.
Choosing the right electrician for an EICR
An EICR should be completed by a competent, qualified electrician with the right test equipment and experience for the type of premises being inspected. Commercial and industrial sites often require an electrician who understands complex distribution systems, operational constraints and the need for clear reporting.
A proper report should be specific to your property. Be cautious of inspections that appear unusually quick for the size of the installation or reports that contain vague, generic observations. You should receive a clear explanation of any defects, the urgency of remedial work and what is needed to achieve a satisfactory outcome.
FCR Electrical Ltd provides NICEIC-approved EICRs for domestic, commercial and industrial clients, with a practical approach to testing, reporting and any required remedial work. The aim is straightforward: identify real risks, explain them clearly and complete the work needed to keep your property compliant and safe.
If you are unsure when your last inspection was completed, cannot locate the previous report, or are planning an electrical upgrade, arranging an EICR is a sensible first step. It gives you a clear picture of the installation you rely on every day and lets you deal with issues before they become an urgent problem.