Preston Air B&B Commercial Rewire 21 Apartments
Commercial Rewire
Single phase vs three phase explained clearly for UK homes, shops and sites. Learn the key differences, uses, costs and when an upgrade makes sense.
EV charger brands compared for UK homes and businesses. See how top options differ on reliability, smart features, support and value.
Learn how to plan workplace EV charging with the right power, charger mix, layout and compliance for a safe, cost-effective installation.
A lot of businesses start asking the same question when the first employee gets an electric car, a fleet begins to change over, or visitors expect charging on site: can businesses install EV chargers? The short answer is yes, but the right answer depends on your building, your power supply, how the chargers will be used, and whether the installation is designed properly from the start.
For some sites, adding EV charging is straightforward. For others, it needs more planning around load capacity, cable routes, access, billing and future expansion. That is why commercial EV charging works best when it is treated as part of your wider electrical infrastructure, not just as a stand-alone add-on.
In principle, most businesses can install EV chargers at their premises. Offices, warehouses, industrial units, retail sites, hospitality venues and mixed-use properties can all support EV charging in the right setup. The real question is not whether it is allowed, but whether the site is suitable and what is needed to make it compliant, practical and cost-effective.
If you own the building, the process is usually more direct. If you lease it, landlord permission may be needed, especially where fixed electrical infrastructure is being altered, parking bays are being designated, or the incoming supply needs to be upgraded. For multi-occupancy commercial buildings, charger ownership and ongoing electricity costs also need to be agreed early.
Physical space matters too. A charger might look simple on the wall, but cable routing, protective equipment, bay positioning and impact protection all need to be considered. On busy commercial sites, the charger has to work around traffic flow and operations rather than creating a new problem.
The biggest factor is electrical capacity. Before any charger is specified, the existing supply and distribution arrangement should be assessed. A small office with modest demand may be able to accommodate a couple of chargers without major changes. A factory or warehouse already running near its available capacity may need load management or a supply upgrade.
This is where a proper site survey matters. A qualified contractor will check the incoming supply, earthing arrangement, board capacity, cable routes, protective devices and likely charger demand. They should also look at how the site operates through the day. A charger used occasionally by staff is different from a bank of units supporting fleet vehicles on a tight turnaround.
There is also a question of growth. Many businesses start with one or two chargers and then quickly need more. Installing with future expansion in mind can save time, disruption and money later. That may mean allowing for spare way capacity, oversized containment, or a charging management system that can handle additional units.
Commercial EV charger installation is electrical work, so compliance comes first. The installation must meet current wiring regulations and be tested and certified correctly. Depending on the type of premises and the wider works involved, there may also be planning, building control or landlord requirements to consider.
For business owners and facilities managers, the key point is simple: this is not a job for guesswork. EV chargers introduce sustained electrical load and have to be integrated safely into the existing installation. If the site already has known issues with its electrical system, those should be addressed before chargers are added.
A NICEIC-approved contractor gives businesses reassurance that the work is being designed, installed and certified to recognised standards. That matters not just for safety, but for insurance, maintenance records and future property transactions.
Not every workplace needs rapid charging. In fact, many commercial sites are better served by standard or fast charging where vehicles are parked for several hours. Staff cars left during the working day often do not need high-output units. Fleet vans with tighter turnaround times may do.
The right setup depends on who will use the chargers and when. Employee charging, customer charging, fleet charging and landlord-provided charging for tenants all have different priorities. Some businesses want simple plug-and-charge access. Others need user authentication, usage reports and billing controls.
This is one of the biggest trade-offs in commercial EV projects. Faster chargers can improve convenience, but they often bring higher infrastructure demands and greater upfront cost. Slower charging can be more economical and perfectly adequate if vehicles are parked for long enough. A good design balances user expectations with the realities of the site. Check Out Some Of The Available WorkPlace Chargers Here https://evec.co.uk/vecsprint-commercial-public-ev-chargers/
Staff charging is often about convenience and retention. Fleet charging is about uptime and operational planning. Visitor charging may be used to improve the customer experience or support longer dwell times on site.
Those aims can sit together, but they should not be treated as the same thing. If a business has only limited available capacity, deciding who gets priority and when becomes part of the design process.
Sometimes yes, sometimes no. It depends on the existing demand at the premises and how intelligently the charging system is managed.
Load balancing can allow chargers to operate without overloading the site by adjusting charge rates in line with live electrical demand. This can be a sensible option where businesses want to avoid the cost and delay of a full supply upgrade. It is especially useful on sites where peak demand rises and falls through the day.
That said, load management is not a magic fix for every property. If the site is already heavily loaded most of the time, or if several vehicles need fast charging at once, a supply upgrade may still be necessary. This is why early assessment is far better than choosing hardware first and asking questions later.
Installing EV chargers can support more than one objective. It can help businesses prepare for fleet electrification, make premises more attractive to staff and tenants, and show customers that the business is investing in practical low-carbon infrastructure.
For some organisations, it is also about staying ahead of demand rather than reacting late. Once EV use becomes normal among staff or customers, the absence of charging can start to feel like a gap in the service offering. On commercial property, that can affect competitiveness.
There are still practical considerations, of course. Businesses need to decide whether charging will be free, subsidised or fully paid for by users. They need to think about bay enforcement, maintenance responsibility and what happens if demand increases. The value is real, but the details need to be managed properly.
The most common issue is underestimating the electrical side of the project. A charger is only as good as the infrastructure behind it. Installing units without checking capacity, protection and future demand can create costly problems.
Another mistake is choosing chargers based only on headline speed. A faster unit is not automatically the better option if it is badly matched to the site or leaves no room for expansion. Businesses also sometimes forget the practical side – signage, bollards, bay markings, cable reach and user access all affect whether the charging points work well day to day.
On leased sites, leaving landlord approval too late can also stall the project. The best route is to deal with permissions, technical surveys and intended usage at the beginning rather than in bits and pieces.
A well-run commercial EV charger project starts with a site visit and assessment. That identifies the existing electrical arrangement, suitable charger locations and any constraints around access, operations or supply. From there, the system can be specified properly, with clear advice on charger type, power availability and any enabling works.
Installation itself may involve new circuits, distribution board work, containment, groundworks, protective barriers and commissioning. Once complete, the system should be tested, certified and handed over with clear guidance on operation and maintenance.
For businesses, the main benefit of using an experienced electrical contractor is that the whole job is coordinated properly. That means fewer surprises, clearer timescales and a better end result. For commercial and industrial sites especially, tidy project delivery matters just as much as the hardware itself.
FCR Electrical Ltd works with businesses that need exactly that – compliant installation, clear communication and practical advice that fits the site rather than a one-size-fits-all package.
Yes, and for many businesses it is already becoming a sensible infrastructure upgrade rather than a nice extra. The key is making sure the system suits the building, the users and the available electrical capacity.
If you are considering workplace or commercial EV charging, the best first step is not picking a charger online. It is getting the site assessed properly, understanding what the premises can support, and planning for the way your business will use charging both now and a few years from now. Done properly, it is safer, easier to manage and much better value over time. To Arrange An Onsite Survey To See If A WorkPlace EV Installation Would Benefit your Company Click Here https://fcrelectrical.co.uk/ev-charger-installation/
A growing number of employees now arrive at work with one eye on their battery range. For many businesses, that shift has turned the top benefits workplace EV chargers provide from a nice extra into a practical site improvement worth serious attention. If your premises already support staff parking, fleet vehicles or regular visitors, EV charging can quickly become part of the infrastructure people expect.
For employers, the case is not only about keeping up with the move to electric vehicles. It is also about making the site more useful, improving the working day for staff, and preparing the building for the way transport is changing. As with any electrical upgrade, the real value depends on the site, the available supply and how the chargers will be used, but the wider business benefits are now hard to ignore.
The pace of EV adoption in the UK has changed the conversation. A few years ago, a workplace charger could be seen as a progressive extra. Now it often sits closer to basic operational planning, especially for companies with car parks, mobile teams or sustainability targets.
Employees are weighing up whether they can realistically switch to electric. Fleet operators are reviewing fuel costs and emissions. Property managers are thinking about how their buildings compare with competing sites. In each case, charging provision removes a practical barrier. It gives people confidence that electric vehicle use will work in day-to-day life rather than only on paper.
That point matters because most EV owners do not need rapid charging all day, every day. They need reliable access at the places where vehicles naturally spend time. A workplace is one of the most useful locations for that.
One of the clearest benefits is employee appeal. Staff who drive electric vehicles appreciate the convenience of charging while they work, rather than having to plan separate charging stops before or after the day. That can make a real difference to routines, especially in areas where public charging is limited, busy or priced at a premium.
For recruitment, workplace charging also signals that the business is thinking ahead. Candidates increasingly notice practical benefits that support lower running costs and greener commuting. Not every applicant will choose an employer because of EV charging alone, but it can strengthen the overall offer, particularly in competitive sectors where staff experience matters.
There is a trade-off to manage here. If demand grows faster than expected, too few chargers can create frustration. That is why good planning matters from the start. Load management, bay allocation and future expansion should be considered before installation rather than after complaints begin.
For businesses with company cars, vans or pool vehicles, the financial case can be stronger still. Charging at work can reduce dependence on public charging networks and help businesses manage energy use more efficiently. Depending on tariffs and vehicle usage, that can lower the cost per mile compared with petrol or diesel.
The savings vary. A business with only one or two electric vehicles will see a different return from a company operating a larger mixed fleet. Even so, when workplace charging is paired with sensible scheduling and the right charger specification, it often supports better control over fleet costs.
There is also an operational benefit. Vehicles can be charged during working hours or between shifts without drivers needing to leave route plans to find available public units. For businesses where uptime matters, that convenience is not a small detail. It can improve reliability across the working week.
Many businesses talk about reducing carbon emissions. Workplace EV chargers are one of the more visible ways to back that up with action. They show that the site is being adapted to support lower-emission transport, whether for staff, fleet users or visitors.
This can support broader ESG goals, internal sustainability targets and client expectations. In some sectors, environmental performance is no longer a branding exercise. It is part of tendering, procurement and supply chain requirements. Having practical low-carbon infrastructure on site helps show intent and progress.
That said, it is worth staying realistic. Chargers alone do not make a business sustainable. Their value is greater when they sit alongside sensible energy planning, efficient building systems and, where suitable, solar generation or other low-carbon upgrades. The point is not to overstate the installation. It is to make measurable improvements where they count.
If your site already has parking, adding EV charging can make that space work harder. Instead of being a passive asset, the car park becomes a useful service point for staff, customers, tenants or visitors. For commercial premises, this can improve the overall value of the building experience.
In some cases, charging also helps a site stand out. Offices, industrial units, mixed-use developments and managed commercial properties are increasingly judged on their readiness for modern energy needs. A premises with installed charging is often more attractive than one that still requires incoming occupiers to solve the problem themselves.
This matters especially for landlords and property managers. Charging provision can support occupancy, tenant satisfaction and future marketability. The exact commercial return depends on the building type and lease model, but infrastructure that future-proofs a site is rarely wasted. You Can Check Out Commercial EV Charging Stations Here https://evec.co.uk/vecsprint-commercial-public-ev-chargers/
Regulation and market expectations are moving in one direction. While requirements differ depending on the type of premises, development works and use of the building, the trend is clear: EV infrastructure is becoming a more normal part of property planning.
Installing workplace chargers now can put a business in a stronger position later. It allows time to assess the site properly, understand electrical capacity and make upgrades in a controlled way instead of under pressure. Waiting until demand is urgent often means tighter timelines, more disruption and fewer choices.
This is where professional assessment matters. Not every site can simply add multiple charge points without reviewing distribution boards, cable routes, earthing arrangements and overall supply capacity. A compliant installation should fit the building properly, not just tick a box.
The top benefits workplace EV chargers offer are not limited to employees. For customer-facing businesses, visitor charging can improve convenience and reflect well on the business. A client who can top up while attending a meeting, visiting a showroom or spending time on site may see that as a genuine advantage.
For some sectors, this is becoming part of customer service. Hotels, leisure venues, offices, healthcare sites and retail locations all benefit differently, but the common thread is convenience. Where people stay for an hour or more, charging becomes useful.
Of course, usage policies need thought. Some businesses provide charging free of charge, while others use access control or payment systems. There is no single right answer. It depends on the type of visitor, how often bays are occupied and whether the chargers are intended as an amenity or a managed service.
Workplace charging often works best as part of a bigger plan rather than a stand-alone add-on. If a business is already reviewing distribution capacity, planning a solar installation, expanding premises or upgrading plant and equipment, it can make sense to include EV charging in that wider scope.
That joined-up approach usually leads to better outcomes. Cable routes can be planned more neatly, disruption can be reduced and the system can be sized with future growth in mind. It also gives a clearer picture of how the building will handle demand across all major electrical loads.
For businesses in the North West and beyond, this is where using an experienced contractor matters. NICEIC-approved electrical work, clear certification and a proper understanding of commercial environments all help ensure the chargers are installed safely, compliantly and with minimal disruption to operations. FCR Electrical Ltd works with businesses that need exactly that balance of technical delivery and straightforward service.
The advantages are real, but a sensible installation starts with the right questions. How many users do you expect now, and how many in two or three years? Are the chargers mainly for staff, fleet, visitors or a mix? Do you need standard fast charging for longer dwell times, or a different setup for operational vehicles?
It is also worth considering site layout, signage, access control and whether bays need to be designated. A charger installed in the wrong place can cause ongoing inconvenience even if the electrical work is sound. Likewise, underestimating future demand can turn a tidy project into a patchwork of later additions.
The best results usually come from matching the system to real use, not from chasing the biggest specification. More power is not always better if vehicles are parked for a full working day. A well-designed setup that balances cost, capacity and convenience is often the better investment.
Workplace EV charging is, at heart, a practical improvement. It helps staff, supports fleets, strengthens premises and prepares businesses for a transport shift that is already well underway. For many sites, the question is no longer whether charging would be useful, but how to install it properly so it works for the business now and still makes sense a few years down the line. Find Out More About Work Place EV Chargers Here https://fcrelectrical.co.uk/ev-charger-installation/
At FCR Electrical Ltd, we install home EV chargers across Thornton-Cleveleys, Blackpool, the Fylde Coast and the wider North West every single week. This particular installation in Thornton-Cleveleys is a great example of what a professional, clean and properly certified EV charger installation looks like — from the existing setup through to the finished product.
The customer had recently made the switch to an electric vehicle and needed a proper home charging solution. Like many new EV owners, they had been making do with a standard 3-pin plug — workable in the short term, but far from ideal for daily use. They contacted FCR Electrical, we carried out a survey, and the EVec vecGO 7.2kW untethered smart charger was installed quickly and cleanly on the front elevation of the property. Check Out Our EV Charger Installation here https://fcrelectrical.co.uk/ev-charger-installation/
As you can see in the before photograph, the front elevation of the property already had a gas meter housing mounted on the wall alongside the main entrance. When planning any EV charger installation, one of the key decisions is positioning — both for aesthetics and for cable run efficiency.
Our engineer assessed the best location to position the charger, keeping it close to the existing infrastructure to minimise the cable run from the consumer unit and ensure a clean, tidy finish. The positioning alongside the gas meter housing was deliberate — it keeps the front of the property neat and avoids the charger looking out of place on the brickwork.
For this installation, we supplied and fitted the Evec 7.2Kw Unteathered Charger Check the Evec range out here https://evec.co.uk/powerpair-7-4kw-dual-charger-charge-two-cars-together/— one of our most popular choices for home installations and one of the best-looking chargers on the market.
Here’s why we recommend the EVec vecGO for home use:
Universal untethered socket — works with all electric vehicles and PHEVs using a Type 2 cable, giving the customer flexibility regardless of what car they drive in the future.
7.2kW output — charges a typical 60kWh battery overnight, making it perfect for home use. Compared to a standard 3-pin socket (2.3kW), the EVec vecGO charges up to three times faster.
Full app control — the free EVec app lets you schedule charging sessions around cheaper off-peak electricity tariffs, monitor your energy usage in real time, and activate ECO mode to charge directly from solar panels if you have them installed.
Solar compatible — a feature that makes the vecGO an excellent long-term investment, particularly for customers who are considering solar panel installation alongside their EV charger.
IP55-65 and IK10 rated — fully weatherproof and impact resistant, built to handle everything British weather can throw at it.
3-year warranty as standard — giving complete peace of mind on your investment.
RFID card access — every vecGO comes with an RFID card for secure, manual charging without needing the app.
The EVec vecGO is available in a range of colours including Shadow Black, Anthracite Grey, Deep Red, Sage Green and Moonlight Cream — our customer in Thornton-Cleveleys chose Shadow Black, which sits beautifully against the warm brick of the property.
The after photograph shows the completed installation. The EVec vecGO sits flush against the brickwork, with the cable trunked neatly along the wall and routed cleanly to the base — no loose cables, no untidy fixings, just a professional finish that you’d expect from a NICEIC-approved contractor.
The trunking is clipped at regular intervals and follows the natural lines of the brickwork, making the installation as unobtrusive as possible on the front of the property. This is the kind of detail that separates a properly trained electrical contractor from a rushed job — and it’s something every FCR Electrical engineer takes pride in.
On completion, the customer received:
FCR Electrical Ltd are OZEV-registered EV charger installers and NICEIC-approved contractors, meaning every installation we carry out meets the highest standards of electrical safety and compliance. We are also TrustMark registered, giving you additional assurance as a homeowner.
We install home EV chargers across Thornton-Cleveleys, Blackpool, Fleetwood, Lytham St Annes, the Fylde Coast, Manchester, Stockport, Cheshire, Lancashire and the wider North West.
Our EV charger installation service includes:
Whether you need a home EV charger, a workplace charging solution, or EV charging infrastructure for a commercial site or development, FCR Electrical have the expertise and accreditations to deliver.
Ready to get your EV charger installed? https://fcrelectrical.co.uk/ev-charger-installation/
Is the EVec vecGO compatible with my electric vehicle? Yes — the untethered vecGO uses a universal Type 2 socket that is compatible with all electric vehicles and plug-in hybrid vehicles (PHEVs) sold in the UK.
Do I need a dedicated circuit for an EV charger? Yes. All EV chargers must be installed on a dedicated circuit directly from your consumer unit (fuse box). Our engineers assess your existing supply as part of the free survey and will advise if any upgrades are needed.
Can I charge my EV from solar panels using the EVec vecGO? Yes — the EVec vecGO has a built-in ECO mode in the app that allows you to charge your vehicle directly from solar generation. If you’re considering solar panels, this makes the vecGO an excellent long-term choice.
How long does an EV charger installation take? Most home EV charger installations are completed within half a day. Our engineers will confirm the expected duration during your free survey.
Are you OZEV registered? Yes — FCR Electrical Ltd are fully OZEV-registered (Office for Zero Emission Vehicles) EV charger installers. This means we are government-approved to carry out EV charger installations and can advise on grant eligibility.
If you’ve recently gone electric or you’re planning your switch, don’t put up with slow 3-pin charging. A dedicated home EV charger from FCR Electrical means faster, safer, smarter charging — every night.
Call us on 01253 364 029 or https://fcrelectrical.co.uk/ev-charger-installation/
We cover Thornton-Cleveleys, Blackpool, Fleetwood, the Fylde Coast, Manchester, Stockport, Cheshire, Lancashire and the wider North West.
FCR Electrical Ltd — OZEV Registered | NICEIC Approved | TrustMark Registered | ECA Member | CHAS Accredited Unit 10 Kilgour House, Red Marsh Drive, Thornton-Cleveleys, FY5 4HP | Tel: 01253 364 029
EVec 7.2kW EV Charger Installed in Fleetwood — From Enquiry to Installation in 7 Days
One of the most common questions we get from new EV owners is: “How long will it take to get a charger installed?”
The answer at FCR Electrical is simple: 7 days. Guaranteed.
This recent installation in Fleetwood, Lancashire is proof of exactly that. Our customer contacted FCR Electrical after buying a new electric vehicle and needing a proper home charging solution. From that very first phone call through to the moment they drove onto their driveway and plugged in for the first time — the entire process took just 7 days.
Enquiry received. Quote sent the same day. Survey booked. Installation completed. Done.
No waiting weeks for someone to come out. No chasing for a quotation. No delays on the day. Just a fast, clean, professional EVec EV charger installation by our NICEIC-approved, OZEV-registered engineers — exactly when we said it would happen. https://fcrelectrical.co.uk/ev-charger-installation/
The FCR Electrical 7-Day EV Charger Installation Guarantee
We introduced our 7-day installation guarantee because we kept hearing the same frustration from customers who had gone electric and were stuck waiting weeks for another installer to show up.
When you’ve just invested in an electric vehicle, the last thing you want is to spend the next month slowly charging off a 3-pin socket in your hallway.
Here’s how our 7-day process works:
Day 1 — Enquiry and quote. You call us or complete our online form. We ask a few simple questions about your property, your parking setup and your consumer unit, and in most cases we can provide a quote on the same day.
Days 2–4 — Free site survey. One of our engineers visits the property to confirm the installation details, assess the cable run from the consumer unit to the charger location, and confirm the best position for your new charger.
Days 5–7 — Installation and certification. Our engineer returns to carry out the full installation — dedicated circuit from your consumer unit, charger mounted and commissioned, app set up and ready to go, full NICEIC certification issued before we leave.
Seven days. Start to finish.
The EVec vecGO 7.2kW Untethered Smart Charger — Fleetwood
For this installation in Fleetwood, we supplied and installed the https://evec.co.uk/powerpair-7-4kw-dual-charger-charge-two-cars-together/— a sleek, reliable and feature-packed home charger that represents outstanding value for money.
The EVec vecGO is one of our most recommended home EV chargers, and for good reason. Here’s what makes it stand out:
7.2kW smart charging — charges a typical 60kWh EV battery overnight. Compared to a standard 3-pin plug (2.3kW), that’s more than three times faster and significantly safer for your home’s electrics.
Untethered universal socket — the vecGO uses a Type 2 socket compatible with all electric vehicles and PHEVs, so whatever car you drive now or upgrade to in the future, you’re covered.
EVec app — full control from your phone — schedule your charging sessions around cheaper off-peak electricity tariffs, monitor your real-time energy usage, and activate ECO mode to charge from solar panels. The app is free, intuitive and available on iOS and Android.
Solar compatible — with ECO mode in the app, the vecGO can charge your vehicle directly from solar generation, making it an ideal partner for customers considering solar panel installation.
IP55-65 and IK10 rated — fully weatherproof and impact resistant. Built for Lancashire weather.
RFID card included — every vecGO comes with a secure RFID card for tap-and-go charging without needing the app. You can register up to 100 cards, making it ideal for households with multiple drivers.
3-year warranty as standard — peace of mind from day one.
Available in five colours — Shadow Black, Anthracite Grey, Deep Red, Sage Green and Moonlight Cream — so you can choose a charger that suits your home rather than just accepting whatever black box the cheapest installer brings along.
If you’ve just gone electric, you might be wondering whether a dedicated charger is really necessary. The short answer is yes — and here’s why.
A standard 3-pin plug charges at around 2.3kW. A 7.2kW EVec vecGO charges more than three times faster. But speed isn’t the only reason to upgrade.
Standard sockets are not designed for the sustained electrical load of overnight EV charging. Regular use of a 3-pin plug for EV charging puts significant strain on the socket, the plug, and the wiring — and in a worst case scenario, can cause overheating or fire. A dedicated EV charger circuit installed by a NICEIC-approved electrician is designed specifically for this purpose, with proper circuit protection and safe, certified wiring throughout.
Smart chargers like the EVec vecGO also allow you to schedule charging during off-peak hours, which can reduce your overnight charging cost significantly. On a standard UK tariff at around 30p per kWh, charging a 60kWh battery costs roughly £18. On a smart off-peak tariff, that same charge can cost as little as £5–£8 — saving EV drivers hundreds of pounds per year.
FCR Electrical Ltd are OZEV-registered EV charger installers and NICEIC-approved contractors. We cover Fleetwood, Blackpool, Thornton-Cleveleys, the Fylde Coast, Manchester, Stockport, Lancashire and the wider North West.
Here’s what you get with every FCR Electrical EV charger installation:
We install home EV chargers, workplace EV chargers, and commercial EV charging infrastructure across the full North West. Whether it’s a single home charger in Fleetwood or a multi-unit installation at a business park in Manchester or Stockport, FCR Electrical have the experience and accreditations to deliver.
Get your free EV charger quote today →
Do you install EV chargers in Fleetwood? Yes — FCR Electrical install home and commercial EV chargers across Fleetwood, Blackpool, Thornton-Cleveleys, the Fylde Coast and the whole of Lancashire and the North West.
How quickly can you install an EV charger? FCR Electrical guarantee EV charger installation within 7 days of your initial enquiry — covering survey, quotation and installation. Most straightforward residential installations are completed within 3–5 hours on the day.
What is the EVec vecGO EV charger? The EVec vecGO is a 7.2kW (single-phase) or 22kW (three-phase) smart home EV charger with full app control, solar compatibility, RFID card access and a 3-year warranty. It is compatible with all electric vehicles and PHEVs. Find out more at evec.co.uk/vecgo/.
Is the EVec charger compatible with my car? Yes. The untethered vecGO uses a universal Type 2 socket that is compatible with all EVs and PHEVs sold in the UK, including Tesla, Nissan, BMW, Kia, MG, Volkswagen and Audi.
Can I get a grant towards my EV charger? The OZEV EV Chargepoint Grant currently provides up to £500 for eligible customers including renters, flat owners and landlords. Homeowners with a private driveway are no longer eligible for this particular grant, however the Workplace Charging Scheme still offers up to £500 per socket for businesses. As OZEV-registered installers, FCR Electrical will check your eligibility and advise on any available funding as part of your free survey.
How much does an EV charger installation cost? Most home EV charger installations cost between £800 and £1,500 all in, depending on the charger model, cable run distance and whether any electrical upgrades are required. FCR Electrical provide transparent, itemised quotes with no hidden costs.
Gone electric? Don’t wait. FCR Electrical can have your EVec home charger installed within 7 days — giving you faster, safer and smarter charging from day one.
Call us on 01253 364 029 or book your free survey online →
We cover Fleetwood, Blackpool, Thornton-Cleveleys, the Fylde Coast, Preston, Lancaster, Manchester, Stockport and the wider North West.
FCR Electrical Ltd — OZEV Registered | NICEIC Approved | TrustMark Registered | ECA Member | CHAS Accredited Unit 10 Kilgour House, Red Marsh Drive, Thornton-Cleveleys, FY5 4HP | Tel: 01253 364 029
Following the success of previous installations, we were appointed to carry out another 22kW three-phase EV charger installation, this time at Fylde Fresh and Fabulous’ Leeds depot.
Our Approach – Commercial EV Charger Installation
For this project, our team delivered a fully turnkey commercial EV charger installation, managing every stage of the works from initial site assessment through to final testing and commissioning. By providing a complete commercial EV charging solution, we ensured the installation was delivered efficiently, compliantly, and with minimal impact on day-to-day business operations.
The project commenced with all required groundworks, including excavation, trenching, ducting, and reinstatement to support the new 22kW three-phase EV charger. Careful planning of the groundworks and cable routes allowed vehicle movements, deliveries, and staff access to continue throughout the installation, avoiding unnecessary downtime at this operational commercial site.
We then designed and installed a dedicated three-phase power supply to support the new commercial EV charging point. This included upgrading the site’s electrical infrastructure where required, installing suitably rated cabling, containment, protective devices, and isolation equipment to ensure the system was safe, reliable, and capable of long-term commercial use.
All commercial electrical works were completed in-house by our qualified electricians, including the installation and integration of the EV charger, connection to the existing distribution system, and full electrical testing. The 22kW EV charger was fully commissioned in line with current UK regulations and manufacturer requirements, with all relevant certification issued on completion.
By managing the installation as a single turnkey commercial EV charger project, we were able to reduce installation times, maintain consistent quality control, and deliver a robust, scalable EV charging infrastructure. The completed installation supports the client’s current electric vehicle charging requirements while allowing for future expansion of commercial EV charging points or fleet charging facilities as demand grows.
The 22kW EV Project EV charger installed at the Leeds site supports fast charging for commercial vehicles and helps future-proof the depot for expanding electric vehicle fleets. More information on project ev 22kw car chargers can be found here https://www.projectev.co.uk/22kw-range/

Whether you operate a single commercial site or multiple depots nationwide, we can design and install scalable EV charging infrastructure tailored to your business.
👉 Request a commercial EV charger quote
👉 Speak to a commercial electrician in Leeds & the North West
To learn more about the benefits of EV charging for businesses, see:
🔗 OZEV guidance on workplace charging
FCR Electrical carried out office lighting and emergency light fault finding in Manchester, restoring safe, reliable lighting for local businesses.